Model : CV1000-DM641.
Available CV1000/2000/CVM1-CPU21-V2.
64K words.Model: C200H-PS221.
Supply voltage: 120/240VAC.2-m Connecting Cable included (No other Connecting Cables required.).Name: CompoBus/S Master Module.
Model: C200HW-SRM21-V1.
Communications protocol: Dedicated CompoBus/S protocol.

CompoBus/S Master Unit
High-speed ON/OFF Bus Saving Wiring Effort and Manufacturing Steps in Factories CJ1G-CPU42P INSTRUCTIONS REFERENCE MANUAL CJ1G-CPU42P C200H A Backplane I/O Mounting Bracket For 8 Slots C200H-ATT83.Connects to left-hand side of Expansion I/O block.Name: Heat/Cool Temperature Control Module.
Model: C200H-TV103.
Sensor: Platinum resistance thermometer: JPt100, Pt100.
Control output: Current output(transistor output used for cooling outputs) CJ1G-CPU42P INSTRUCTIONS REFERENCE MANUAL. Model: C200HS-MP16K.
Capacity: 16K words/32K words.Model: C200H-OD219.
No. of points: 64 pts.
Specifications: 4.5 VDC, 16 mA to 26.4 VDC, 100 mA..
Weight: 250g max.C500-OA I/O Unit Triac Output 24 pts C500-OA223(3G2A5-OA223).
AC250V 1A.C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK21-V1.Output method: Relay.
Inputs: ---.
Outputs: 8.Name: e-CON Connectors.
Specifications: Outputs; 16 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection CJ1G-CPU42P INSTRUCTIONS REFERENCE MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Hostt,
Controller to detect the location and,
content of the error CJ1G-CPU42P Manual. Number of outputs: 8 pts.
Max. switch-ing capacity: 1.0 A at 24 V DC.
External connector: Terminal block.
Weight: 240 g max.Model: C500-CT021.
2 pts.
50kcps 77 mode CJ1G-CPU42P Manual. C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC211.Provided with a 2-m cable for ladder programming.1 set (2 included).