Name: Heat/Cool Temperature Control Module.
Model: C200H-TV101.
Sensor: Platinum resistance thermometer: JPt100, Pt100.
Control output: Transistor output.Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations/No. of Boards: One in Inner Board slot 2 (right slot).
Pulse inputs: 4 inputs.
Pulse outputs: 2 outputs CJ1H-CPU65H-R INSTRUCTIONS REFERENCE MANUAL.
Dimensions: 25 × 110 × 107 mm (W × H × D) CJ1H-CPU65H-R
Weight: 90 g max.
Model: C200H-OA224.
No. of points: 12 pts.
Specifications: 0.5 A, 250VAC.Product name: CJ-series I/O Control Unit.
Specifications: One I/O Interface Unit is,
required on each Expansion Rack.
Connecting Cable: CS1W-CN@@3 Expansion,
Connecting Cable Mount to the right of,
the Power Supply Unit.
Current consumption: 5V , 0 CJ1H-CPU65H-R INSTRUCTIONS REFERENCE MANUAL. 02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable. Unit type: CJ1 Basic I/O Units.
Product name: DC Input/Transistor Output Units.
Specifications: Output type, Sinking;
I/O points, 32 inputs, 32 outputs;
Input voltage,Input current, 24VDC, 4 CJ1H-CPU65H-R INSTRUCTIONS REFERENCE MANUAL. 1mA,
12 to 24VDC, 0.3A;
Commons, 16 points, 1 common;
External connection, Fujitsu connector.
No. of words allocated: 4 words.
Current consumption: 5V, 0.14A; 24V, --.
Standards: UC1, N, CE.
A Wide Range of Basic Mixed,
I/O Units for Different Applications,
and Wiring Methods.
One Mixed I/O Unit has connectors for,
both inputs and outputs.
Use Mixed I/O Units to easily ,
build space-saving systems.
I/O Control UnitModel: C200H-MR832.
Description: RAM, 8K words, capacitor back-up.no clock.Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 4.
No. of unit numbers allocated: 1 CJ1H-CPU65H-R Manual.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk with one Position,
Control Unit that supports MECHATROLINK-II CJ1H-CPU65H-R Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.