Model: CPM2C-16ET1M. Units with transistor outputs only.
1 MIL connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Name: Compact Connectors.
Specifications: Outputs; 4 outputs; PNP.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery CJ1M-CPU11-ETN INSTRUCTIONS REFERENCE MANUAL.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit CJ1M-CPU11-ETN
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices.
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications CJ1M-CPU11-ETN INSTRUCTIONS REFERENCE MANUAL. C500-OD I/O Unit Transistor Output 64 pts C500-OD213(3G2A5-OD213).
DC24V 0.1A.Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface: Pulse-train open-collector,
output with Pulse Counter Function;
Number of control axes : 4 axes.
No. of unit numbers allocated: 2 CJ1M-CPU11-ETN INSTRUCTIONS REFERENCE MANUAL.
Current consumption: 5V, 0.31A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speed.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors. Model : CVM1D-BC051.
5-slot.Model: C200H-OC224.
No. of poiints: 8 pts CJ1M-CPU11-ETN Manual.
Specifications: 2A, 250VAC/24VDC(For resistive loads)Independent commons.Output method: Relay.
Inputs: 12.
Outputs: 8.Control method: Semiclosed loop with automatic trapezoid or S-curve acceleration/deceleration.

Control output signals: Analog CJ1M-CPU11-ETN Manual.
Controlled axes: 2 axes max.SYSMAC LINK Units can be powered up two units in one unit.
One cable included with feeder.