Model: CPM2C-24EDTM. Units with 24 I/O points
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sinking transistor.One Ethernet Option Board can be mounted in either option board slot 1 or 2.
Note: Cannot be used for the CP1L-L10.Product name: N@@S1- type CPU Units with 40 I/O Points CJ2M-CPU14 INSTRUCTIONS REFERENCE MANUAL.
Specifications: Power Supply, 100 to 240 VAC; Inputs, 24; Outputs, 16;
Output type: Relay CJ2M-CPU14
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): 0.30A.
Current consumption: 5 V, 0.21A; 24 V，0.09A.
Standards: CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality CJ2M-CPU14 INSTRUCTIONS REFERENCE MANUAL.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Model: C200H-MP831.
Description: EPROM, 8K words, no clock.CPU Unit: CP1H-X CPU Units.
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, AC power supply; Output method, Relay output;
Inputs, 24; Output, 16 CJ2M-CPU14 INSTRUCTIONS REFERENCE MANUAL.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controller.
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
ABS interface: Yes.Specifications: 8 Kwords with clock.Name: Host Link Module.
Model: C200H-LK101-PV1.
Communication ports: 1 fiber port.The initial configuration of the G language unit in the industry due to the use of G language,
Complex processing procedures do not need to be able to make the ladder diagram.
The realization of the first 1 axis simultaneous control of 4 axis simultaneous control in the industry is due to the multi task function,
Can be executed at the same time or the 2 axis simultaneous control of 4 axes, and then can achieve the 4 axis independent control, etc.
Up to 8 units can be installed CVM1 8 units can be installed 1 units, can control up to 32 axes.
Applicable to ABS encoder by standard,
Applicable to the ABS type (abbsolute output) encoder, so after the emergency stop, no need to search for the origin, etc CJ2M-CPU14 Manual. .
S curve also according to the standard configuration plus deceleration curve, in addition to the trapezoidal outside,
Also configured too suppress the mechanical vibration of the S shape curve CJ2M-CPU14 Manual.
Program login maximum of up to 100
G language can be programmed with the MC support software G