Protector for CPU bus connector CV500-COV01Name: e-CON Connectors.
Specifications: Outputs; 16 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CP1L-L14DT1-D REFERENCE MANUAL.
Bit-level I/O distribution reduces,
wiring in the system CP1L-L14DT1-D
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: C200H-IM211 CP1L-L14DT1-D REFERENCE MANUAL.
No. of inputs: 8 pts.
Input voltage: 12 to 24 VAC/DC, +10%/–15%.
Input current: 10mA, 24VDC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts.
Internal currentcon-sump-tion: Inputs: 8.Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 8 outputs;
Signal range selection:
Set separately for each output CP1L-L14DT1-D REFERENCE MANUAL.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V;
1/4,000 (Settable to 1/8,000) *2.
Conversion period: 1 ms/point,
(Settable to 250 μs/point)*2.
Accuracy at ambient temperature of 25°C:
±0.3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.14A; 24V, 0.14*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for conveerting analog input,
signals into binary data CP1L-L14DT1-D Communications Commands Manual.
Analog Output Units for converting binary ,
data into analog output signals. Control method: Semiclosed loop with automatic trapezoid or S-curve accelerattion/deceleration CP1L-L14DT1-D Communications Commands Manual.
Control output signals: Analog.
Controlled axes: 2 axes max.C500-ID I/O Unit DC Input 32 pts C500-ID215(3G2A5-ID215).
DC12-24V 10mA.