Model : CV500-CPU01-V1.
SFC / Ladder 512 (with RAM30K words, the top internal link).Model: C200H-OC222N.
No. of points: 12 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD006(3G2A5-AD006).
Input: 4 pts.
Specification: +1~+5V、4~20mA.Model: CPM2C-10CDT1M-D CPM1A-40CDT-D-V1 I/O Wiring Diagram. CPU Unit: Units with 10 I/O points.
2 MIL connectors CPM1A-40CDT-D-V1
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.Output method: Analog resolution: 1/6000.
Analog Inputs: 2.
Analog Outputs: 1.A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required.
No PC card is provided with the Unit CPM1A-40CDT-D-V1 I/O Wiring Diagram. Name: MIL Connectors.
Specifications: Outputs; 32 outputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CPM1A-40CDT-D-V1 I/O Wiring Diagram.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. I/O Link of 8 input bits and 8 output bits Unit type: CJ1 CPU Bus Units.
Product Name: Serial Communications nits.
Specifications:Communications Interface,
2 RS-422A/485 ports;
Communications functions,
The following functions can be,
selected for each port:
Protocol macro Host Link,
NT Links (1:N mode)Serial Gateway,
No-protocol Modbus-RTU Slave.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.38A; 24V,--.
Standards: UC1, N, L, CE CPM1A-40CDT-D-V1 Manual.
The Serial Communications Units That Enable,
High-speed Connections with External Devices.
Each Serial Communications Unit provides two,
serial communications ports: RS-232C and,
RS-422A/485,, and the serial communications,
mode can be set separately for each port from,
Protocol Macro, Host Link, NT Link,
Serial Gateway, and No-protocol CPM1A-40CDT-D-V1 Manual.