Power supply: AC power supply.
Output method: Relay output.
Inputs points: 24 points.
Outputs points: 16 points.Name: External Connector.
Model: C500-CE405.
Specifications: Crimp-style terminal; 40p and a Connector Cover (Horizontal- type).NO. OF I/O SLOTS: 11 SLOTS4 thermocouple inputsName: Bit Slave Units with e-CON Connectors CRT1-ID16-1B UL Standards and CSA Standards.
Specifications: Outputs; 2 outputs; NPN CRT1-ID16-1B
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection.
Industry-standard e-CON connectors CRT1-ID16-1B UL Standards and CSA Standards.
Short-circuit protection safeguards the network,
from I/O short circuits.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application. Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications CRT1-ID16-1B UL Standards and CSA Standards.
Positioning functions: Memory operation,
Direct operation by ladder programming,
I/O communications: 64 nodes;
No. of axes: 8 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control.
A wide range of position control,
functions are available with,
this position control unit. Unit name: Loop Control Boards.
Specifications: No. of function blocks:
500 blocks max.
Standards: UC1, N, CE.
The open nature of the PLCs is joined,
by integrating harrdware, software,
and networking to meet your needs CRT1-ID16-1B Manual.
Increasing amounts of information,
standardization, and open standards,
form the basis for achieving hardware,
and networking capabilities for process control.
A wide raange of software that can be easily,
used by design, development, and maintenance,
personnel makes operating and maintaining,
the system far easier CRT1-ID16-1B Manual.