Model: CPM2C-10C1DTC-D. CPU Unit: Units with 10 I/O points.
2 Fujitsu connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sinking transistor.
Internal clock: Yes.Type: Counter inputs, pulse outputs.
12 DC inputs: Yes.
Counter inputs: 2.
Analog inputs: None.
8 transistor outputs: Yes CS1G-CPU42H REFERENCE MANUAL.
2 pulse outputs: No.
2 analog outputs: Yes.Master unit provides data exchange, diagnostics and message communications CS1G-CPU42H
Network type : Profibus-DP.
CJ1W-PRM21 Rating : 12 Mbps; 1200 m distance; 125 nodes; shielded twisted pair cable; allows 7, 168 words of I/O data per PLL; one RS-485 port.Emergency stop unit: 2 inputs/2 outputs, 4 general-purpose inputs.Product name: N@@-type CPU Units with 20 I/O Points CS1G-CPU42H REFERENCE MANUAL.
Specifications: Power Supply, 100 to 240 VAC; Inputs, 12; Outputs, 8;
Output type: Relay.
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.18A; 24 V，0.08A.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality CS1G-CPU42H REFERENCE MANUAL.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC222C1000H-CP CPU 62 k words 1024 pts C1000H-CPU01.Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface: Pulse-train open-collector,
output with Pulse Counter Function;
Number of control axes : 2 axes.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.27A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speedd CS1G-CPU42H Communications Commands Manual.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors CS1G-CPU42H Communications Commands Manual.