Release Key Type: Special (resin).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @ D4BL-1DRA-A INSTRUCTION sheet.
Conduit size (See Note.): 1/2-14NPT D4BL-1DRA-A
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) D4BL-1DRA-A INSTRUCTION sheet.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head. Slim and Compact Switch with Better.
Seal and Ensuring Longer Service.
Life than D4E.
Flat springs with an improved lever ratio of the built-in.
switch ensure smooth snap action and long life expectancy.
Protection cover protects the built-in switch from dust and oil.
Plunger incorporates a tough seal cap that lasts for a long time D4BL-1DRA-A INSTRUCTION sheet.
One touch connector eliminates need for tedious wiring,
operations and reduces downtime for wiring and,
maintenance (models with standard, easy-to-use screw,
terminals are also available).
Minute load model with gold cladding is optimal for,
electronic control.
Molded terminal types as well as molded terminal types,
with operating indicator lamps are available for screw,
terminal systems.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for Information on,
approved models.).
No difference in mounting pitch and characteristics,
between D4E-@N and D4E models. Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: SJT(O) cable *3.
Actuator: Sealed crossroller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cablee lengths of 3 and 5 m available on standard models D4BL-1DRA-A Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation D4BL-1DRA-A Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)