Actuator: Roller lever (resin lever, bearing roller).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms D4SL-N2AFG-N INSTRUCTION sheet.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement D4SL-N2AFG-N
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Specifications: I/O; PNP (input: - common,
output: + common); 8 inputs/8 outputs D4SL-N2AFG-N INSTRUCTION sheet.
I/O connections: Sensor connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage:
Supplied from external source for outputs.
Includes Sensor Connector That Conforms to,
Industry Standards And Can Be Used to Connect.
Sensors with Pre-wired Cables without Using,
Special Tools D4SL-N2AFG-N INSTRUCTION sheet.
Equipped with the standard Smart Slave,
functions that provide powerful.
preventative maintenance and,
troubleshooting capabilities.
Digital I/O Terminal compatible with,
industry-standard sensor connectors.
Connect sensors easily without special tools.
Reduce time required for wiring.
Load short-circuit detection. Determine the vibration of equipment and machinery.
With the aid of vibration level can be easily recognized, set the ON/OFF output.
Confirm vibration waveform by AC monitor output.
Sensor part of the use of IP67 protection structure, can also be used in harsh environments.
Can switch acceleration, speed (linear output type).
Using 5 processing modes to determine the abnormal state of high accuracy (manual setting).
Ontology: sensor part.
Type: manual setting.
Cable length: 5m. Release key type: general type (metal).
Connection mode: connector.
The solenoid voltage / indicator type: DC24V/ orange.
Lock / release mode: mechanical lock / electromagnetic release.
Contact composition (door open and close detection switch + lock control switch):6 contacts (2NC/1NO + 2NC/1NO).
Conduit size: G1/2.
6 contact electromagnetic lock safety door switch world minimum level.
Small electromagnetic lock safety door switch D4SL-N.
A touch of the 2 wiring way, can reduce the working hours.
Built in a variety of types of switches, applicable to all types of devices (you can choose 4 contacts, 5 contacts, 6 contacts).
Lock strength for a reassuring 1300N.
The insertion direction of the keyy can be changed without taking down the head D4SL-N2AFG-N Manual.
Significantly reduce the solenoid current helps to reduce the cost of the power supply.
The sliding key unit of D4SL-NSK10-LK.
Using the lock key can prevent the locked in the daangerous area of the fence D4SL-N2AFG-N Manual.
D4SL-N can be easily mounted on the side of 40mm aluminum frame.
Material for resin, the most suitable light weight door.