E32-T11L type: special beam type; long range / high function,
Specialty: M4 screw side,
Shape / detection distance (mm): 910; 800; 500 (180),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 3 (0.1),
Fiber element for meeting diversified needsSize: 48 x 96mm.
Control output 1: voltage output (SSR driver) E3S-R1C42 INSTRUCTION sheet.
Control output 2:--.
Auxiliary output: 4 points (auxiliary output 2, 1 common, auxiliary output 3, 4 public general) E3S-R1C42
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 1 points.
Communication: RS-485.
Event input: 6 points.
Remote SP input: there E3S-R1C42 INSTRUCTION sheet.
Transfer output: have.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply E3S-R1C42 INSTRUCTION sheet.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SP input, suitable for a wide range of applications.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperature controller is connected to each other by using the compoonent communication E3S-R1C42 Manual.
A new type of proportional control allows you to control the valve. Appearance: Unshielded, M30.
Sensing distance: 18 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tigghtening strength E3S-R1C42 Manual. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.