Case color: Black.
Control output: Voltage output (for driving SSR).
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 2.
Detection of heater burnout, SSR failure, and heater overcurrent:
Detection for single-phase heaters.
No. of event inputs: --.
Transfer output *2: -- E5CN-R1TU INSTRUCTION Manual.
Communi cations: --.
Previous model: Thermocouple input, --;
Resistance thermometer input, -- E5CN-R1TU
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0 E5CN-R1TU INSTRUCTION Manual. 2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter E5CN-R1TU INSTRUCTION Manual.
Switch the PV display between three colors.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs. Sensing method: Distance-settable(BGS Models).
Connection method: Pre-wired (2 m).
Response time: 1 ms.
Sensing distance: 125 to 40 mm (Min. distance set),
25 to 300 mm (Max. distance set) .
Model: PNP output .
Compact and Reliable,
Laser Photoelectric Sensor.
Safety and reliability with laser class 1 (JIS and IEC).
Product lineup includes models with distance setting without,
influence of color.
MMaximum ambient operating temperature of 55°C and water,
proof construction in E3Z class E5CN-R1TU Manual.
E32-T54 type: environment resistant; heat resistant,
Speciality: heat resistance of 150 DEG C: side view,
Shape / detection distance (mm): 300; 230; 150 (60),
Bending radius (mm): R35 E5CN-R1TU Manual.
Standard test object (minimum test object) (mm) 1: 1.5 (0.1),
Fiber element for meeting diversified needs