Sensing method: Through-beam (Emitter + Receiver).
Connection method: Standard M8 connector.
Sensing distance: 30 m.
Model: PNP output .
The Standard for Photoelectric Sensors,
with a Secure Track Record of One,
Million Sold Yearly.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models E6HZ-CWZ6C INSTRUCTION sheet.
Mechanical axis and optical axis offset of less than ±2
E6HZ-CWZ6C5° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light. Case color: Black.
Control output: Voltage output (for driving SSR).
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 1 E6HZ-CWZ6C INSTRUCTION sheet.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: --.
Transfer output *2: --.
Communi cations: RS-485.
Previous model: Thermocouple input, --;
Resistance thermometer input, --.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy E6HZ-CWZ6C INSTRUCTION sheet.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colors.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displaays E6HZ-CWZ6C Manual.
Models are available with one or two alarm outputs. Fitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 2 E6HZ-CWZ6C Manual.
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 14.