Case color: Black.
Control output: Current output.
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 1.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: --.
Transfer output *2: Transfer output using control output.
Communi cations: RS-232C EE-SX671-WR INSTRUCTION sheet.
Previous model: Thermocouple input, --;
Resistance thermometer input, -- EE-SX671-WR
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0 EE-SX671-WR INSTRUCTION sheet. 5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter EE-SX671-WR INSTRUCTION sheet.
Switch the PV display between three colors.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs. Cable: 4-to-5 Conductor Conver sion Cable (See note.).
Shape: --.
Cable length: 0.3 m, --.
Now, more advanced with a new mutual.
interference prevention function.
Long-distance detection of up to 6,000 mm supports a wide vari,
ety of applications.
The Sensor is not affected by the color or material of objects.
A setting plug with temperature compensaation makes it easy to,
set the sensing range EE-SX671-WR Manual.
Mutual interference prevention. Wire length: 4m.
Screw switch: M6.
Temperature sensing part of temperature controller.
In the application field of packaging molding machine is wideely used,
Further strengthened the high cost models EE-SX671-WR Manual.
Easy to install / replace the structure.
With springs, you can use the active part (E52Z-CA1D-40).