Appearance: Unshielded.
Sensing surface: Front.
Sensing distance: 1.6 mm.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations ES2-HB INSTRUCTION Manual.
Response frequency: 1 kHz.
Low current consumption. Size: 48 x 48mm ES2-HB
Control output 1: relay.
Auxiliary (alarm) output: 3.
Transfer output: have.
Event input: 2.
Communication: -.
Break detection: -.
Power supply voltage: AC100 ~ 240V.
The white PV (current value) with excellent visibility shows the segment to make the confirmation work more easily.
Eye-catching white + industry''s largest display size
The black and white display and the industry''s largest display size to achieve excellent visibility ES2-HB INSTRUCTION Manual.
No matter from which angle or in the natural lighting environment, the dark scene,
Can quickly and accurately confirm the current value.
Displays the current value (PV/ white), the target value (SV/ green) and the progress of the program (PRG, SEG/ yellow) ES2-HB INSTRUCTION Manual.
Can be viewed at the same time, there is no need to switch the display, so as to improve the efficiency of operations. Slit width: Width 0.5, 1, 2, 4 × 11 mm.
Installation procedure: Plug-in type.
Applicable type: E3S-CT@1. Ultra small rotary encoder (diameter 20), incremental.
Machine built in mini 1046.
The size and resolution of 1000P/R diameter 20mm.
Axle and hollow shaft type.
Power supply voltage: DC5V.
Output form: NPN open collector output.
Axis shape: shaft extension. Size: 48 x 96mm.
Control output 1: linear current output.
Control output 2:--.
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: -.
Communication: RS-485.
Event input: 4 points.
Remote SP input: there.
Transfer output: have.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output aand remote SP input, suitable for a wide range of applications ES2-HB Manual.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperrature controller is connected to each other by using the component communication ES2-HB Manual.
A new type of proportional control allows you to control the valve.