Number of beams: 127.
Protective height: 1280mm.
Model: NPN output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Number of beams: 6.
Protective height: 270mm FQ-CR10100F-M INSTRUCTION sheet.
Model: NPN output.
Basic Type with a combination of FQ-CR10100F-M
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions. Number of beams: 112.
Protective height: 2270mm.
Model: NPN.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications FQ-CR10100F-M INSTRUCTION sheet.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Number of beams: 87.
Protective height: 880mm.
Model: PNP output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires FQ-CR10100F-M INSTRUCTION sheet.
Fast response time of 5 ms. Field of view: Wide View (Long-distance).
Number of pixels: 350,000 pixels.
Color: NPN.
Field of view/Installation distance: Refer to figure 3 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Number of beams: 54.
Protective height: 1105mm.
Model: PNP output.
EASY type reduces implementation costs.
with 1/2 the mounting time.
In pursuit of simple functions: Upon detection of personnel,
the machine stops.
Can be used for simple hand intrusion detection.
Implementation costs can be significantly reduced. Sensing method: Through beam.
Connection method (cable length): Pre-wired (2 m).
Sensing distance: 300 mm.
Beams: Gap, 25 mm; Qty, 3.
Sensingwidth: 50 mm.
Output type: PNP open collector.
Compact Bodyy, High-visibility FQ-CR10100F-M Manual.
Indicators, and Ideal for Picking.
Systems for Small Parts.
A variety of part sizes can be handled: F3W-D sensing,
width: 100 mm, F3W-E sensing width: 50 mm.
Low-profile Sensor with thickness of 8 mm annd enlargeable,
work opening FQ-CR10100F-M Manual.
Models with connectors are also available.
Support for XS5 Smartclick Connectors reduces work and,
simplifies wiring.