Size: 6 dia.
Type: Standard type.
Sensing distance: 4 mm.
Resolution (See note.): 0.1 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Classification: High-sensitivity.
Contact gap: H (0.25 mm).
Actuator: Low force wire hinge lever; High OP ZX-GTC11 PDF datasheet.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety ZX-GTC11
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available ZX-GTC11 PDF datasheet. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications ZX-GTC11 PDF datasheet.
Long-distance model for up to 1,000 mm.Optical system: Through-beam.
Measuring width: 30 mm.
Sensing distance: 0 to 500 mm.
Resolution: 12 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Hinge lever; Medium OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Optical fiber division.
Fiber length: 1 meters.
Allowable bending radius: 30mm above. Actuator: General purpose; Plunger; AC.
Mounting: Side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also beeen added,
to the series ZX-GTC11 datasheet PDF catalog.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with gground terminals have CE marking ZX-GTC11 datasheet PDF catalog.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)