C500-ID I/O Unit DC Input 64 pts C500-ID114(3G2A5-ID114).
DC12V 7mA.Model: CPM2C-10C1DT1M-D. CPU Unit: Units with 10 I/O points.
2 MIL connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: Yes.Model : C500-FZ001.
C500-FZ Special I/O Unit Fuzzy Logic Unit C500-FZ001 CJ1W-NC233 PDF datasheet. CV500-BS CPU Bus Unit BASIC Unit CV500-BSC21
RS-232C: 2 ports, RS-422: 1 port CJ1W-NC233Model: CPM2C-8ET1C. Units with relay outputs only.
1 Fujitsu connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Supply voltage: 100 or 230 V AC (selectable), 50/60 Hz.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0 CJ1W-NC233 PDF datasheet. 5 A(30 W total, see note).Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: B, E, J, K, L, N, R, S,
T, U, WRe5-26, PLII, ±100 mV.
Conversion speed: 20 ms/4 inputs,
10 ms/2 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1 CJ1W-NC233 PDF datasheet.
Current consumption: 5V, 0.12A; 26V, 0.08A.
Standards: UC1, N, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,

with previous systems CJ1W-NC233 datasheet PDF catalog.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CJ1W-NC233 datasheet PDF catalog.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.