Product name: CJ-series I/O Control Unit.
Specifications: Mount one I/O Control Unit,
on the CPU Rack when connecting one or,
more Expansion Racks.
Connecting Cable: CS1W-CN@@3 Expansion,
Connecting Cable Connected Unit:
CJ1W-II101 I/O Interface Unit,
Mount to the right of the CPU Unit.
Current consumption: 5V , 0 CP1E-N40DT1-D PDF datasheet. 02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units CP1E-N40DT1-D
To expand a CJ/NJ-series Controller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable. Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 4 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 CP1E-N40DT1-D PDF datasheet.
Conversion period: 1 ms/point,
(250 μs/point can also be set.)*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE CP1E-N40DT1-D PDF datasheet.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. Specifications: 1 × RS-232C port + 1 × RS-422/485 port, protocol macro function.Name: e-CON Connectors.
Specifications: Inputs/Outputs;
8 inputs /8 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
BBit-level I/O distribution reduces,
wiring in the system CP1E-N40DT1-D datasheet PDF catalog.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1E-N40DT1-D datasheet PDF catalog.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.