Achieve Low-cost Measurements with an,
Infrared Thermosensor.
The ES1B has an electromotive output as high as that of a,
thermocouple, thus connecting directly to the thermocouple input,
terminal of the Temperature Controller is possible.
Four temperature ranges are available to cover a wide range of,
temperature measurement needs, including those in the food,
processing, packaging, molding, and electronics industries E2E-X18ME1-M1-Z PDF datasheet E2E-X18ME1-M1-Z
High-accuracy temperature measurement is ensured by a high-speed,
response of 300 ms (for a 63% response) and an indication,
reproducibility of ±1% PV.
Unlike thermocouples, the Thermosensor does not deteriorate.
Therefore, stable, real-time temperature control can be maintained E2E-X18ME1-M1-Z PDF datasheet. Power supply voltage: 5 to 12 VDC.
Output configuration: Line-driver output.
Resolution (pulses/rotation): 300, 360, 500, 600, 720, 800, 1,000, 1,024;
1,200, 1,500, 1,800, 2,000, 2,048; 2,500, 3,600.
Hollow-shaft Encoder.
Incremental model.
External diameter of 40 mm.
Resolution of up to 3,600 ppr.
Slim design at only 26 mm thick. Size: M12 (Brass); Single; Shielded.
Sensing distance: 5 mm E2E-X18ME1-M1-Z PDF datasheet.
Connecting method (See note 1.): M12 Connector.
Body length: Long.
Output configuration: NPN.
Operation mode NO.
A new generation in global applications. Sensing method: Retro-reflective Sensors.
Appearance: Horizontal.
Connection method: Pre-wired.
Sensing distance: 7 m.
Functions: --.
Model: PNP output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Proximity sensors for preventing errors caused by metal debris accumulation.
The chips of aluminum, cast iron and so on are not caused by false action.
Equipped with SmartClick type relay connector.
Lead out type.
Shape: shield, M18.
Detection range: 4mm.
Output mode: AC 2 wire type.
Action mode: NO. Case color: Black.
Control output: Relay output.
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 1.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: 2.
Transfer output *2: --.
Communi cations: --.
Previous model: Thermocouple input, --;
Resistance thermometer input, --.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Contrroller (auto/
manual, RUN/STOP, and alarms) and the PV or SV E2E-X18ME1-M1-Z datasheet PDF catalog.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colorrs E2E-X18ME1-M1-Z datasheet PDF catalog.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs.