Available on either 3.5” or 5.25” floppy disks.Power supply: DC power supply.
Output method: Relay output.
Inputs points: 24 points.
Outputs points: 16 points.Model: C500-CN812N.
Cable length 80cm.
CV Series C Series Expansion ← → I / O device CPU Connecting cable(Vertical-wired)Name: e-CON Connectors C200H-CPU31-E OPERATION MANUAL.
Specifications: Outputs; 16 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection C200H-CPU31-E
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site C200H-CPU31-E OPERATION MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Required when supplying backup power.
For 2 Units.Supply voltage: 100 to 120 or 200 to 240 VAC (automatic voltage setting), 50/60 Hz
Operating voltage range: 85 to 132 or 170 to 264 VAC
Power consumption: 200 VA max C200H-CPU31-E OPERATION MANUAL.
Output capacity: 12 A, 5 VDCModel: CPM2C-PA201. Input: 100 to 240 V AC.Output: 24 V DC/600 mA.I/O Cable (for Rack I/O to Backplane) 0.6 m (L) CV500-CN613Unit type: CJ1 CPU Bus Unit.
Product Name: Controller Link Unit.
Specifications:Communications cable,
Wired shielded wisted-pair cable ;
Communications type,
Data links and message service;
Duplex support, No;
Max. Units mountable per CPU Unit, 8;
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.35A; 24V,--.
Standards: UC1, N, L, CE.
New Controller Link Units,
Now with 4,000 Send Words.
The Controller Link is an FA,
network that can send and receive,
large amouunts of data easily,
and at high speed C200H-CPU31-E Manual.
The Controller Link supports data,
links that enable sharing,
data between PLCs and computers,
and a message service that enables,
sending and receiving data whenever required.
Systtems can be flexibly built by using Repeater,
Units to enable T-branches, long-distance wiring,
and converting part of the network to optical cable C200H-CPU31-E Manual.