Model: C200HW-COM03-V1.
Specifications: One RS-422/485 port.Model : C500-BP001.
Optional extension cable is necessary..Unit type: CJ1 Basic I/O Units.
Product name: Relay Contact Output Units.
Specifications: Output type , --;
I/O points, 16 inputs;
Maximum switching capacity, 250VAC/24VDC, 2A;
Commons, 16 points, 1 common;
External connection, Removable terminal block C500-CPU11-V1 INSTRUCTION SHEET C500-CPU11-V1
No. of words allocated: 1 word.
Current consumption: 5V, 0.11A; 24V, 0.096A max.
Standards: UC1, N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices C500-CPU11-V1 INSTRUCTION SHEET.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput.
Unit classification: CJ1 Special I/O Units.
name: Position control unit.
Specifications; Control method/Control,
output interface:Open-loop control by pulse,
train output/Line-driver output;
Number of control axes : 4 axes.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0 C500-CPU11-V1 INSTRUCTION SHEET. 36A; 24V, --.
Standards: UC1, CE.
High-speed, High-precision positioning,
with 1, 2, or 4 axes.
Versatile functions and superb performance,
enable the construction of compact,
high-performance machines.
With its ultra-compact size of 31 × 90mm (W×H),
this highly space-efficient Position Control Unit,
(PCU) enables up to 4 axes of motor control. Unit classification: CJ1 CPU Bus Unit.
Specifications:Equipped with Master,
and Slave functionality.
Controls for up to 32,000 points per Master.
Communications:Remote I/O Coommunications,
Master (fixed allocations or user-set,
allocations) Remote I/O Communications,
Slave (fixed allocations or user-set,
allocations) Message communica29A; 24V,-- C500-CPU11-V1 Manual.
Smallest in the Industry!
A DeviceNet Unit foor the,
CJ Series that Boasts Industry-leading,
Performance and Functions C500-CPU11-V1 Manual.
One of the following connection cables is required for ladder programming.