CV500-MR Memory PC Unit RAM Disk Board 2MB memory CV500-MR261.Control method: Semiclosed loop with automatic trapezoid or S-curve acceleration/deceleration.
Control output signals: Analog.
Controlled axes: 4 axes max.UM: 31.2K words.
DM: 6K words.
EM: 6Kx3 banks(18K) words.
Instruction processing time (basic instructions): 0 CJ1W-OD231 OPERATION MANUAL. 1 µ.s min.
No. of I/O points: 1, 184 points CJ1W-OD231
Max. no.of con-necting Expansion I/O Racks: 3 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10.
RS-232C: NO.CVM1-LK SYSMAC BUS CVM1 PCLINK MODULE CVM1-LK401.Model: C500-ETL01.
C500-ET Special I/O Unit Educational Tool I/O Unit C500-ETL01.Name: SYSMAC LINK Module CJ1W-OD231 OPERATION MANUAL.
Model: C200HW-SLK23.
Communications method: N: N token bus.
Transmission method: Manchester code, base band.
Transmission path: Bus.
Weight: 400 g max.I/O Control UnitI/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 60K steps.
Data memory capacity: 128K words (DM: 32K words, EM: 32K words ×3 banks)NO. OF I/O SLOTS: 3 SLOTSCPU Unit: CP1L-L CPU Units with 14 Points CJ1W-OD231 OPERATION MANUAL.
Specifications: CPU type, Memory capacity: 5K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, DC power supply; Output method, Relay output;
Inputs, 8; Output, 6.
Standards: UC1, N, L, CE.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CP1L-L" has a standard-feature peripheral USB port.
Function blocks (FB) allow you to build up modular structure and,
programming of ladder diagrams. Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 16 axes.
No. of unit numbers alloccated: 1 CJ1W-OD231 Hardware Manual.
Current consumption : 5V, 0.36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CJ1W-OD231 Hardware Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.