Protector for Simple Expansion I/O Rack connector CV500-COV04Name: e-CON Connectors.
Specifications: Inputs/Outputs;
16 inputs /16 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CP1E-N20DT-A PROGRAMMING MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1E-N20DT-A
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1E-N20DT-A PROGRAMMING MANUAL. Unit classification: CJ1 Special I/O Units.
Product name: Process Analog Input Units,
(Isolated-type Resistance Thermometer Input Units).
Input points: 4 inputs.
Signal range selection: Common inputs.
Signal range: Resistance thermometer: Pt100, JPt100.
Conversion speed (resolution): Conversion,
speed: 250 ms/4 inputs.
Accuracy at ambient temperature of 25°C:
Accuracy: (±0 CP1E-N20DT-A PROGRAMMING MANUAL. 3% of PV or ±0.8°C,
whichever is larger) ±1 digit max.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 24V, --.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5V).
A Unit supports four input channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage).
All inputs are isolated.
Control specifications: voltage output / pulse train output.
Axis of control: 1.
Location data: 200.
Connection with servo motor drive,
The location data is transmitted by PC to carry out high precision positioning.
Can set the number of different types of products and location parameters, and can monitor the operation process online.
Equipment operation is flexible and convenient, can achieve start and pause,
Automatic and manual mode switching, counting and zero, cylinder pressure time adjustment, etc CP1E-N20DT-A Hardware Manual. .
Screw automatic discharge, feeding, fixed, the machine is automatically completed by one time, without manual assistance.
High speed production beatt, can achieve a single station speed of not less than 1-1 CP1E-N20DT-A Hardware Manual. 5 seconds / piece.
Positioning accuracy is high, the position error is not more than 0.02 mm.