For 5-slot Backplane.Model : CVM1-MP703-V1.
Position Control Unit (NC222) for.Model : C500-FZ001.
C500-FZ Special I/O Unit Fuzzy Logic Unit C500-FZ001.C500-IA I/O Unit AC Input 16 pts C500-IA121(3G2A5-IA121).
AC100-120V 10mA.Model: C200HW-ME16K.
Capacity: 16K words.Power supply: AC power supply.
Output method: Transistor output source type CP1E-N20DT1-A PROGRAMMING MANUAL.
Inputs points: 6 points CP1E-N20DT1-A
Outputs points: 4 points.Model: C200H-MR433.
Description: RAM, 4K words, battery back-up.with clock (CPU21, CPU23 only).UM: 31.2K words.
DM: 6K words.
EM: 6Kx3 banks(18K) words.
Instruction processing time (basic instructions): 0.1 µ.s min.
No. of I/O points: 880 points.
Max. no.of con-necting Expansion I/O Racks: 2 Racks CP1E-N20DT1-A PROGRAMMING MANUAL.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10.
RS-232C: NO.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.Model: CPM2A-60CDT1-D. Power supply: DC power supply.
Output type: Transistor sourcing.
Inputs points: 36 points.
Outputs points: 24 points.Connecting I/O control module and interface module CP1E-N20DT1-A PROGRAMMING MANUAL.
Cable length: 0.3 m.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space comparedd,
with previous systems CP1E-N20DT1-A Hardware Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1E-N20DT1-A Hardware Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.