Control specifications: voltage output / pulse train output.
Axis of control: 1.
Location data: 200.
Connection with servo motor drive,
The location data is transmitted by PC to carry out high precision positioning.
Can set the number of different types of products and location parameters, and can monitor the operation process online CP1E-N30DT1-A OPERATION MANUAL.
Equipment operation is flexible and convenient, can achieve start and pause,
Automatic and manual mode switching, counting and zero, cylinder pressure time adjustment, etc CP1E-N30DT1-A.
Screw automatic discharge, feeding, fixed, the machine is automatically completed by one time, without manual assistance.
High speed production beat, can achieve a single station speed of not less than 1-1 CP1E-N30DT1-A OPERATION MANUAL. 5 seconds / piece.
Positioning accuracy is high, the position error is not more than 0.02 mm.Model: C200HW-PD024.
Supply voltage: 24VDC.
Comments: --.Unit type: CS1 Special analog I/O Units.
Product name: Analog Output Units.
Specifications: I/O points, 8 outputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/4000 ;
Conversion speed, 1 s/point CP1E-N30DT1-A OPERATION MANUAL.
Externa connection, Removable erminal block.
Current consumption: 5V, 0.13A; 26V, 0.18A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals.Model: Unit version 1.2.
NJ system: CPU Rack;Expansion Rack,
Not supported.
CJ1 system: CJ1 system, Expansion Backplane,
8 Units (per CPU Unit).
CP1H system: CP1H PLC, 2 Units.
NSJ system: Controller NSJ, Not supported;
Expansion Backplane, 8 Units.
New Controller Link Units,
Now with 4,000 Send Words.
The Controller Link is an FA,
network that can send and receive,
large amouunts of data easily,
and at high speed CP1E-N30DT1-A Manual.
The Controller Link supports data,
links that enable sharing,
data between PLCs and computers,
and a message service that enables,
sending and receiving data whenever required.
Systtems can be flexibly built by using Repeater,
Units to enable T-branches, long-distance wiring,
and converting part of the network to optical cable CP1E-N30DT1-A Manual.