C500-RT SYSMAC BUS Remote I/O Master Slave Wired C500-RT002-V1.
PCF.With the optical connector 2Number of inputs: 8 pts.
Input Voltage: 12 to 24V DC.
Input Current: 10 mA.Model: C200H-OD212.
No. of points: 16 pts.
Specifications: 0.3 A, 24 VDC.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Resistance Thermocouple Input Units CP1E-N40SDT-D REFERENCE MANUAL.
points Input: 4 inputs CP1E-N40SDT-D
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100.
Conversion speed (resolution):
100 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CP1E-N40SDT-D REFERENCE MANUAL.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them CP1E-N40SDT-D REFERENCE MANUAL.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. I/O Interface UnitModel : CVM1D-PA212.
12A.
Attach two things in the same format in each base Please you.CV500-HD SYSMAC BUS PC Unit Hard Disk Drive For 100 VAC CV500-HDD01.Product name: AC Power Supply Unit.
Power supply voltage: 100 to 240VAC.
Output capacity: 5-VDC output capacity, 5A;
24-VDC output capacity, 0.8A;
Total power consumption, 25w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, Yes.
Standards: UC1, N, L, CE.
Equipped with the RUN output for,
checkking the operation status,
as well as the replacement CP1E-N40SDT-D Manual.
notification function for easy,
maintenance.
Lineup of five models including the,
AC power supply (25W).
Stable power supply is available from the,
CJ-series CPU Uniit to each I/O Units via the,
dedicated bus CP1E-N40SDT-D Manual. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options.