Model: C200H-OD215.
No. of outputs: 32 pts.
Specifications: 24 VDC.Model : CV2000-CPU01-EV1.
SFC / Ladder 2, 048 (with RAM62K words, the top internal link).Model: C200H-OC226N.
No. of points: 16 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).Specifications: Coaxial cable(5C-2V cable).Unit name: Loop Control Boards CP1L-L20DR-D INSTRUCTIONS REFERENCE MANUAL.
Specifications: No. of function blocks:
500 blocks max CP1L-L20DR-D
Standards: UC1, N, CE.
The open nature of the PLCs is joined,
by integrating hardware, software,
and networking to meet your needs.
Increasing amounts of information,
standardization, and open standards,
form the basis for achieving hardware,
and networking capabilities for process control.
A wide range of software that can be easily,
used by design, development, and maintenance,
personnel makes operating and maintaining,
the system far easier CP1L-L20DR-D INSTRUCTIONS REFERENCE MANUAL. Peripheral port to RS-422 conversion cable (length: 0.2 m).Available on either 3.5” or 5.25” floppy disks.Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 8 outputs;
Signal range selection:
Set separately for each output CP1L-L20DR-D INSTRUCTIONS REFERENCE MANUAL.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V;
1/4,000 (Settable to 1/8,000) *2.
Conversion period: 1 ms/point,
(Settable to 250 μs/point)*2.
Accuracy at ambient temperature of 25°C:
±0.3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.14A; 24V, 0.14*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting aanalog input,
signals into binary data CP1L-L20DR-D Manual.
Analog Output Units for converting binary ,
data into analog output signals. Output type: Transistor sinking.
Inputs points: 24 points.
Outputs points: 16 points.CVM1-CL Special I/O Uniit Communication Link Unit CVM1-CLK21 CP1L-L20DR-D Manual. C500-DA/3G2A5-DA Special I/O Unit Analog Output C500-DA004(3G2A5-DA004).
Output: 2 pts.
Specification: -10~+10V.