Model: C1000H-TER01.
Each node requires one of the ends of the network.Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CPM1A-20CDT-D-V1 OPERATION MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CPM1A-20CDT-D-V1
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CPM1A-20CDT-D-V1 OPERATION MANUAL. ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name: ASCII Module.
Model: C200H-ASC21.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2: RS-422A/485(peripheral Size: 60mm.
Type: 4 lines.
Lighting voltage: DC24V.
Color: amber.
Large tactile buttons and uniform lighting to create a general space CPM1A-20CDT-D-V1 OPERATION MANUAL.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the.
Damping mechanism to ensure high impact resistance.
A slim body with a thickness of 14.6 mm. C200HS-CPU21-E CPU
High Performance, Small Rack Style, Built-in RS-232C Port
The C200HS-CPU21-E and C200HS-CPU23-E controllers offer some of the same basic functionality as models C200H-CPU01-E/CPU03-E.
These controllers have the added capabilities ideally suited for high speed machine control,
which includes larger memory,
larger instruction set,
and increased speed.CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 100 VAC CV500-FHD01-E100 to 120/200 to 240 VAC (Supports SYSMAC LINK and SYSMAC NET Link Systems.)CPU Unit: CP1H-X CPU Units.
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models witth transistor outputs only);
Power supply, DC power supply; Output method, Transistor output (sourcing);
Inputs, 24; Output, 16 CPM1A-20CDT-D-V1 Manual.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controoller CPM1A-20CDT-D-V1 Manual.
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O.