Model: C200H-OD212.
No. of points: 16 pts.
Specifications: 0.3 A, 24 VDC.Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CPM2A-40CDR-A OPERATION MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CPM2A-40CDR-A
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CPM2A-40CDR-A OPERATION MANUAL. Model: CPM2C-20C1DTM-D. CPU Unit: Units with 20 I/O points.
2 MIL connectors.
Inputs: 12 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sinking transistor.
Internal clock: Yes.I/O capacity/Mountable Units(Expansion Racks): 960 points/30 Units (2 Expansion Racks max.).
CJ1G-CPU42H OMRON Program capacity: 10K steps.
OMRON CPU42H Data memory capacity: 64K words(DM: 32K words, EM: 32K words × 1 bank) CPM2A-40CDR-A OPERATION MANUAL.
LD instructionCV500-BC Backplane CPU Exclusively for the Personal Computer Unit CV500-BC105.
Required for Hard Disk Drive Unit.Specifications: Without clock (see below).Communications protocol: Dedicated CompoBus/S protoco.
Code: Manchester code.Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 16 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CPM2A-40CDR-A Manual.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CPM2A-40CDR-A Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.