Size: 96 x 96mm.
Control output 1: current.
Auxiliary (alarm) output: 4.
Transfer output: have.
Event input: 4.
Communication: RS-485.
Disconnection detection: 2.
Power supply voltage: DC24V/AC24V.
E5 - C series of new products program.
Maximum 256 segment of the program capacity,
Support for multiple applications E5EN-HTPRR2BFM-500 Basic Type.
Can be set up to 8 procedures (mode) x 32 (step) procedure E5EN-HTPRR2BFM-500
The use of high 25mm (E5AC-T), 18mm (E5AC-T) PV display (white),
Improve visibility.
Not only on the top of the body, but also on the front,
The use of communication adapter cable (sold separately) connected to the computer after,
No power connection can be set.
It can be easily set by CX-Thermo (sold separately) E5EN-HTPRR2BFM-500 Basic Type.
High speed sampling to achieve 50ms.
With auxiliary output (4 points), event input (maximum 6 points), the transmission output,
Support a variety of applications.
Slender fuselage depth 60mm.
Easy to connect with PLC through no program communication.
Combined temperature control device through component communication.
Add position proportional control type, also support control valve control E5EN-HTPRR2BFM-500 Basic Type. Type: high temperature.
Measuring temperature range: 0 ~ +1000.
The target size: 40mm diameter (from 500mm).
No need to contact the workpiece, you can measure the temperature.
Achieve no damage, health and efficient temperature management.
A small spot diameter 3mm and 8mm diameter two types.
Reproduction of positive and negative 0.5 degrees Celsius, response speed of 0.4 seconds,
(95%) with high precision and high speed measurement.
In addition to the original middle temperature (0 ~ +500 C),
Also added in low temperature (- 50 DEG C ~ +500),
High temperature (0 ~ +1000 degrees C) models.
New measurement distance up to 500mm, 1000mm long distance type.
Use another programmer, can change the temperaature monitoring, radiation rate,
Moving average function and output range E5EN-HTPRR2BFM-500 Basic Type Manual.
(picture for the installation of programmer in the ES1 body)
E32-DC200FR type: standard type; soft (new standard),
Specialty: M3 screw ((small) with casing,
Bending radius (mm): R; R1 E5EN-HTPRR2BFM-500 Basic Type Manual.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs