Sensing method: Through beam.
Connection method (cable length): Pre-wired (5 m).
Sensing distance: 3m.
Beams: Gap, 25 mm; Qty, 5.
Sensingwidth: 100 mm.
External indicator: Possible.
Compact, Resistant to Mutual.
Interference, and Ideal for Picking a Variety of Parts.
Mounts to a parts rack and uses indicators to show parts,
picking procedures F3SG-4RE0320P14 Operation Manual. Functions as a mistake-proofing Sensor F3SG-4RE0320P14
Use either the built-in LED indicators or external picking indicators. Number of beams: 58.
Protective height: 1185mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap F3SG-4RE0320P14 Operation Manual.
Comes standard with interlock and auxiliary output functions. Number of beams: 39.
Protective height: 400mm.
Model: PNP output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. OMRON''s electrode, connecting nut, lock nut printed material identification F3SG-4RE0320P14 Operation Manual.
Material: SUS304.
Quality (g): about 170.
Material identification line: 1 lines. Number of beams: 95.
Protective height: 960mm.
Model: NPN output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Number of beams: 143.
Protective height: 1440mm.
Model: PNP output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Material: Titanium.
Weight (g): Approx. 100.
Material indication lines: 5 lines.
A Wide Variety of Electrodes for Long Lasting.
Reliability.
Standard Electrodes are made of stainless steel (SUS 304) and,
can be used in applications for purified water.
SUSS316 Electrodes can be used in applications where resistance,
to corrosion is required F3SG-4RE0320P14 Configuration Tool for Model F3SG SD Manager 2 Manual. Titanium and HAS Electrodes can be,
used in applications where resistance to acid is requuired F3SG-4RE0320P14 Configuration Tool for Model F3SG SD Manager 2 Manual.
For applications where long electrodes are required, a connection,
nut and two Lock Nuts can be used to extend the electrodes 1 m,
at a time.