Input type: DC voltage input type.
Output type: BCD+ transistor; -; NPN open collector (5 bit output +HH, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with K3HB-HTA-BCD1 User's Manual.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table K3HB-HTA-BCD1
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations K3HB-HTA-BCD1 User's Manual.
DA compact converter that allows,
communications between RS-232C/USB and,
RS-422/485 devices. Ideal for industrial,
applications.
Allows communications between RS-232C/USB (Universal,
Serial Bus) and RS-422/485 devices.
Applicable in FA environments: Has passed environment,
resistance tests equivalent to those for control devices.
CE marking (except for USB).
UL/CSA certification (mark license recognition) K3HB-HTA-BCD1 User's Manual.
Compact 30-mm-wide body supports both screw-mounting and,
DIN track mounting.
Operation either with or without echoback available.
Functionality to convert between USB and RS-232C,
communications added.
USB driver providing virtual communications port for USB,
communications is available. Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated ffrom the start of operation K3HB-HTA-BCD1 Manual.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions K3HB-HTA-BCD1 Manual. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.