Type: DC Bus Line Connector.
Number of Connectors: 1.
DC Backup Block for S8TS Prevents 24-VDC.
Outages Due to Power Interruptions or Failures.
Supplies 24 VDC for a fixed period of time even during.
AC input outages to considerably improve system reliability.
Block Power Supply Basic Block is connected using a Bus Line S8VM-03015CD Connection Guide.
Connector to achieve a simple system configuration S8VM-03015CD
Notification of alarms is provided by indications on the main unit.
and alarm signal output.
RoHS-Compliant. Conduit: JIS B 0202 G½.
Applicable cable: Cabtire cable.
Inner diameter (D)of seal rubber: 10.6 mm.
External diameter of cable: Min, 8.5 mm; Max, 10.5 mm.
Applicable model: WL-N, WL, D4A-@N, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2 S8VM-03015CD Connection Guide.
Connectors (SC Series).
Cabtire cables and flexible tubes with various diameters are used to,
connect machine tools and controllers with Limit Switches. To ensure,
the watertightness of the edges of the conduits, use an SC Connector,
that is suitable for the external diameter of cable and model of Limit Switch. I/O classification: Digital output.
Internal I/O circuit common: PNP (+ common) S8VM-03015CD Connection Guide.
I/O points: 16.
I/O connection method: Sensor connector.
Compact Remote I/O Terminals that.
Save Wiring Effort and Enable.
Long-distance Communications.
Long-distance or high-speed communications,
mode is selectable.
Incorporates I/O connectors making it possible to,
minimize the size.
I/O connectors save wiring effort.
Flexible DIN track mounting is possible through a,
DIN track attachment.
Eight-point sensor connector models and 16-point,
MIL connector models are the same size. I/O classification: Input.
Internal I/O circuit common: PNP (– common).
I/O points: 8.
Rated voltage: 24 VDC.
I/O rated voltage: 24 VDC.
Long-distance Communications Supported by SRTT2 Models,
(Long-distance/High-speed Communications Selection) S8VM-03015CD Manual.
Ultra-compact at 80 x 48 x 50 (W x H x D) mm for,
4-point and 8-point terminals and 105 x 48 x 50,
(W x H x D) mm for 16-point terminals.
Two independent powerr supplies can be used,
because the I/O terminals are insulated from the internal circuits S8VM-03015CD Manual.
DIN track mounting and screw mounting are both supported.