Item: Station.
Easy temperature and humidity control with an SD Card. Type: Line beam lens.
Spot: Beam width: 12 mm.
Cost Revolution Led by UV Curing.
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time ZEN-20C1DT-D-V1 REFERENCE MANUAL.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs ZEN-20C1DT-D-V1
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system.
Equipped with a color LCD that makes settings simple and reliable. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Panel mount plunger; Low OP.
Best-selling Basic Switch Boasting ZEN-20C1DT-D-V1 REFERENCE MANUAL.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available ZEN-20C1DT-D-V1 REFERENCE MANUAL. Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Actuator: Plunger.
Approved Standards: UL CSA EN.
Small, High-precision Enclosed Switch.
Small, High-precision Enclosed Switches with Built-in Basic,
Switches for High Repeataability and Durability of 10 Million,
Operations Minimum ZEN-20C1DT-D-V1 Manual.
Same mounting pitch as Z Basic Switch.
Requires less operating force than conventional limit switches.
Lineup includes modes with operation indicators for easy,
mmaintenance and inspection ZEN-20C1DT-D-V1 Manual.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for Information on approved models.).