Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications ZG2-XC8CR User's Manual.
Long-distance model for up to 1,000 mm ZG2-XC8CR Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Short hinge cross roller lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZG2-XC8CR User's Manual.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Unidirectional short hinge roller lever; Parallel.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety ZG2-XC8CR User's Manual.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Power supply voltage: DC24V.
Control output: NPN output. Item: Extension Terminal Set (For ZR-RX45).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being connfined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome ZG2-XC8CR Manual. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr whichever way it is inserted ZG2-XC8CR Manual.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.