Actuator: Sealed (Booted); One-way action sealed roller arm lever; AC.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity ZN9-EM01-S USER'S GUIDE.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches ZN9-EM01-S DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking ZN9-EM01-S USER'S GUIDE.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)Optical system: positive and negative radiation.
Detection distance: 20 positive and negative 1mm.
Beam shape: point beam.
Beam diameter: diameter of 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. Optical system: diffuse type.
Detection distance: 100 positive and negative 20mm ZN9-EM01-S USER'S GUIDE.
Beam shape: linear beam.
Beam diameter: 3.5mm * 60 M.
Resolution: 1 m.
Cable length: 2m. Optical system: diffuse type.
Detection distance: 1500 positive and negative 500mm.
Beam shape: linear beam.
Beam diameter: 40mm * 1.5 m.
Resolution: 500 m.
Cable length: 0.5m. Classification: Micro load.
Contact gap: H (0.25 mm).
Actuator: Short hinge roller lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact foorm for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZN9-EM01-S Manual.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminnal protective cover is available ZN9-EM01-S Manual. Power supply: 24 VDC.
Output type: NPN.
ZG2 debut!
Achieving stable measurement.
through innovative technology.