A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Easy temperature and humidity control with an SD Card ZX-GT2840S41 OPERATION MANUAL. Appearance: Sensor head: Anchored type ZX-GT2840S41
Temperature: Measurement range, 0 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 20 to 85%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1 Caps to secure cable,
(one for each, front and rear) ZX-GT2840S41 OPERATION MANUAL.
Easy temperature and humidity control with an SD Card. The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths. Power supply voltage: DC24V.
Control output: NPN output. Appearance: Integrated type.
Optical system: Through-beam ZX-GT2840S41 OPERATION MANUAL.
Measuring width: 28mm.
Sensing distance: 40mm.
Resolution: 10µm.
Output type: NPN.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area. ZX-SW11V3 computer connected sensor function setting tool [precision monitor]Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Long hinge lever.
Best-selling Basic Switch Boasting.
High Precision and Widde Variety ZX-GT2840S41 Manual.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series off standard models for micro loads is available ZX-GT2840S41 Manual.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available.