Power supply: DC.
Output type: PNP.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 1.2A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC ZX-LDA11-N User's Manual.
Ionization time: 1 s.
Ion balance: ±10V max.
Amount of ozone generated: 0 ZX-LDA11-N01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max ZX-LDA11-N User's Manual. , load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing).
Weight (Packaged): Approx. 1 kg (Approx. 1.8 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten ZX-LDA11-N User's Manual.
Accessories: Instruction sheet, I/O connector, Stand, Streamer.
This ionizer series is designed to go anywhere.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues. The temperature, humidity and differential pressure of the cleaning chamber and the simple cleaning room by using PC,
Power consumption and other manufacturing environment.
Implement unified management software.
Centralized management of environmental information in the production site.
Real time analysis of measurement data.
Installation site and measurement conditions can be understood through the map.
Can only be converted to the required data format Excel. Shape: Cylindrical.
Dimensions: 3 dia. x 18 mm.
Sensing distance: 0.5 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiece Displacement ZX-LDA11-N Manual.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit ZX-LDA11-N Manual.
Prevent mutual interference for up to five Units by using a Calculating Unit.