Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 50 ± 10 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications ZX-SAM12 OPERATION MANUAL.
Long-distance model for up to 1,000 mm ZX-SAM12 Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications ZX-SAM12 OPERATION MANUAL.
Long-distance model for up to 1,000 mm.Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications ZX-SAM12 OPERATION MANUAL.
Long-distance model for up to 1,000 mm.Product name: Logging unit.
Power supply: Battery/DC cable.
Easy and Quick "Checking Power"at the Worksite. Item: Station.
Easy temperature and humidity control with an SD Card. Actuator: General purpose; Plunger; AC.
Mounting: Side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been addedd,
to the series ZX-SAM12 Inductive Displacement Manual.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with gground terminals have CE marking ZX-SAM12 Inductive Displacement Manual.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)