Power supply: DC.
Output type: NPN.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted ZX-XF12 Introduction Manual ZX-XF12
It can now be set to positions without interference from,
the work feed and without limitations of size of work area. Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Reverse hinge roller lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety ZX-XF12 Introduction Manual.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Classification: High-sensitivity ZX-XF12 Introduction Manual.
Contact gap: H (0.25 mm).
Actuator: Low-force hinge lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Optical system: diffuse type.
Detection distance: 80 positive and negative 15mm.
Beam shape: linear beam.
Beam diameter: 900mm * 60 M.
Resolution: 2 m.
Cable length: 2m. Shape: Cylindrical.
Dimensions: 3 dia. x 18 mm.
Sensing distance: 0.5 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpieece Displacement ZX-XF12 Manual.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit ZX-XF12 Manual.
Prevent mutual interference for up to five Units by using a Calculating Unit.