Contact gap: F (1.0 mm).
Actuator: Slim spring plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZX-XGC20A Introduction Manual.
A series of standard models for micro loads is available ZX-XGC20A
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2.2mm * 45 M.
Resolution: 0.6 M.
Cable length: 2m. Connection method: Pre-wired ZX-XGC20A Introduction Manual.
Cable length: 5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Actuator: Sealed (Booted); Sealed crossroller plunger; AC ZX-XGC20A Introduction Manual.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when thhe cover is removed for,
easy connection ZX-XGC20A Manual.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)Optical system: diffuuse type ZX-XGC20A Manual.
Detection distance: 50 positive and negative 5mm.
Beam shape: linear beam.
Beam diameter: 1.0mm * 30 m.
Resolution: 0.25 M.
Cable length: 2m.