Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Analog Output Unit.
Output points : 4 inputs.
Signal range selection:
Set separately for each input.
Signal range: 0 to 10 V, ±10 V,
0 to 5 V, ±5 V, 0 to 1 V, ±1 V.
Conversion speed (resolution):
40ms/4 inputs.
Externa connection: Removable erminal block CP Series Safety Precautions.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 CP Series12A; 26V, 0.12A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value CP Series Safety Precautions.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CP Series Safety Precautions.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Model: CPM2C-8EDM. Units with inputs only.
1 MIL connector.
Inputs: 8 inputs.
Outputs: ---.
Input type: 24 VDC.
Output type: --.Name: Heat/Cool Temperature Control MModule CP Series Manual.
Model: C200H-TV101.
Sensor: Platinum resistance thermometer: JPt100, Pt100.
Control output: Transistor output.Model: C200HW-COM02-V1.
Specifications: One RS-232C port.C500-OD I/O Unit Transistor Output 32 pts C500-OD414(3G22A5-OD414) CP Series Manual.
DC12～48V 0.3A.Model: C500-CN523.
Cable length: 5 m.
Programming Console Connecting Cable.
For extension and connection of FIT of FIT.