LK Automation Limited LK Automation Limited
Download Sort: OMRON
Home >> Manual Download
OMRON G3J-T405BL Manual G3J-T405BL INSTRUCTION MANUAL
Product model: G3J-T405BL
Name: solid-state contactor
Brand: OMRON
Sort: INSTRUCTION MANUAL
File language: English
Structure: single stable type.
Contact structure: 1a.
Structure: high flux protection.
Coil rated voltage: DC24V.
Voltage resistant 10kV 1 pole 3A open close small relay.
High power electromagnetic loop is used to achieve high sensitivity (200mW).
Small relays, but can ensure the impact resistance of 10kV G3J-T405BL INSTRUCTION MANUAL. Safety outputs: Instantaneous, --; OFF-delayed, 4 PST-NO G3J-T405BL
Auxiliary outputs *1: 1(Semiconductor).
OFF-delay time: *2.
Rated voltage: 24 VDC.
Terminal block type: Screw terminals.
Logical AND Function Adds Flexibility to I/O Expansion.
Facilitates partial or complete control system setup.
Solid-state outputs (excluding Expansion Units).
Detailed LED indications enable easy diagnosis G3J-T405BL INSTRUCTION MANUAL.
TÜV SÜD certification for compliance,
with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4).
Approved by UL and CSA.
New unit joins the Series with the following two additional features:
-OFF-delay time of up to 150 seconds can be set.
-Two logical AND connection inputs. Number of phases: Three-phase.
Insulation method: Phototriac coupler.
Operation indicator: Yes (yellow) G3J-T405BL INSTRUCTION MANUAL.
Rated input voltage: 12 to 24 VDC.
Zero cross function: Yes.
Type: Externally attached heat sinks.
Applicable load: 25 A, 100 to 240 VAC.
Number of pole: 3.
Compact, Slim-profile SSRs with Heat Sinks.
Solid State Contactors for Three-phase.
Heaters Reduced Installation Work.
with DIN Track Mounting.
RoHS compliant.
Surge pass protection improved surge dielectric strength,
for output currents. (OMRON testing).
Slim design with 3-phase output and built-in heat sinks.
DIN Track mounting types and screw mounting types are available.
All DIN Track mounting types mount to DIN Track.
(applicable DIN Track: TR35-15Fe (IEC 60715)).
Conforms to UL, CSA, and EN standards (TÜV certification). Terminal (Wire connection): Push-In Plus Terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: DC, 24V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA usiing Au-plated G3J-T405BL Manual.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed locatiion) G3J-T405BL Manual.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging.
Related products
OMRON
Soft-start/stop Solid State Contactors
G3J-T Series
OMRON Soft-start/stop Solid State Contactors G3J-T Series
Soft-start/stop Function Starts and Stop
OMRON
Solid State Contactor
G3J-T211BL-C AC100-240
OMRON Solid State Contactor G3J-T211BL-C AC100-240
Numer of elements: 3. Isolation method
OMRON
Solid State Contactor
G3J-T217BL-C AC100-240
OMRON Solid State Contactor G3J-T217BL-C AC100-240
Numer of elements: 3. Isolation method
OMRON
Solid State Contactor
G3J-T211BL-C DC12-24
OMRON Solid State Contactor G3J-T211BL-C DC12-24
Numer of elements: 3. Isolation method