LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
G3J-T Series | OMRON Soft-start/stop Solid State Contactors G3J-T Series
OMRON G3J-T Series Manual And Instructions
G3J-T Series datasheetPDF datasheet
G3J-T Series datasheetPDF datasheet
G3J-T Series datasheetPDF datasheet

OMRON G3J-T Series Product information and technical parameters:
Brand: OMRON
Name: Soft-start/stop Solid State Contactors
Model: G3J-T Series
Soft-start/stop Function Starts and Stops.
Three-phase Motors Smoothly and.
Economically.
Function like an inverter by holding down the starting current.
Comply with UL, CSA, IEC (400-V models only), and JEM.
requirements.
Mount with screws or to DIN tracks.
Compact monoblock construction for the G3J-T217BL.
(W: 100 × H: 100 × D: 110 mm) with a heat sink.
Snubber circuit and varistor are built-in.
Operation indicator.

Isolation: Photocoupler.
Zero cross function: Yes.
Indicator: Yes(Yellow).
Applicable output load (See note 1.): 20 A at 200 to 480 VAC.
Rated input voltage: 5 to 24 VDC.
Wide Lineup of General-purpose Solid State.
Relays with Applicable Loads of 5 to 90 A.
AC Output Relays with 75-A and 90-A output currents have been,
added to the G3NA Series OMRON G3J-T Series.
All models feature the same compact dimensions to provide a,
uniform mounting pitch G3J-T Series
Built-in varistor effectively absorbs external surges.
(except G3NA-D210B).
Operation indicator enables monitoring operation.
Protective cover for greater safety.
Standard models certified by UL and CSA and -UTU models by TÜV.
(except G3NA-410B, G3NA-420B, and G3NA-440B(-2)) OMRON G3J-T Series. The main body: with shell type / socket terminal type.
Classification: internal connection special type, double contact.
Pole number: 2 pole.
A variety of eight pin pin type electric power.
With shell models have AC4 rated specifications (50/60Hz AC200/220V, 50/60Hz AC100/110V).
Installation, wiring convenient, easy to operate.
Has more than 5 million mechanical life, durable OMRON G3J-T Series.
Standard type, with shell type, special contact specifications, double contact type, double coil latch type, etc., the product is complete. Refer to Safety Precautions for All Solid State Relays.
Detects failures in SSR used for heater,
temperature control and simultaneously,
outputs alarm signal. This SSR supports the,
safe design of heater control systems, and,
contributes to maintenance improvements by the user.
Main detection items:
SSR short-circuits and SSR open-circuits,
Alarm output possible to NPN/PNP-input devices.
The failure-detection function is built-in and power is supplied,
from the main circuit power supply making wiring simple.
Slim design (width: 22.5 mm) incorporating a heat sink.
In addition to screw mounting, DIN track mounting is also possible.
Certified by EC, UL, and CSA. Type: 4 poles.
Classification: Models with single contacts. G3J-T Series.
Rated voltage: 50, 200/220, or 220/240 VAC; 24 VDC .
New Latching Levers for Circuit Checking.
Added to Our Best-selling.
MY General-purpose Relays.
Now lead-free to protect the environment.
VDE certification (Germany).
Differeent colors of coil tape for AC and,
DC models to more easily distinguish them G3J-T Series.
MY(S) models with latching levers added for,
easier circuit checking.


...More relevant models >>>>