Inverter input power: 3 phase / single phase AC200V.
Weight: 2.1KG.
Standard applicable line diameter: 2 square mm or more.
Used to suppress harmonic currents generated by a transducer.
The effect of harmonic current suppression is better than that of AC reactor,
And it can be used with AC reactor. Applicable converter capacity: maximum 15KW, minimum 0 3G3MX2-A4055-ZV1 Quick Reference Guide. 4KW.
Connected to the converter input / output cable,
Reduce the noise from the power supply line to the frequency converter or from the converter to the power line 3G3MX2-A4055-ZV1 Function name: single phase 200V.
Power: 0.4KW.
Rated output voltage: 3 phase, 200 ~ 240V (the output voltage can not exceed the input voltage).
Built in brake unit (brake resistance needs to be matched) 3G3MX2-A4055-ZV1 Quick Reference Guide.
Weight: 1.1KG.
Dimension (w * h) 128mm *:68.
Outline dimension (deep):122.5mm.
Mechanical automation concept.
Positioning function.
The use of options.
(EtherCAT, CompoNet and DeviceNet) to realize the field bus communication.
Driver programming function.
Current vector control.
High starting torque: 0.5Hz up to 200%.
Safety features, in compliance with ISO13849-1:2008 EN (Cat 3G3MX2-A4055-ZV1 Quick Reference Guide. 3/PLd) and IEC60204-1 stop level 0 standard.
Frequency output up to 580H. Specification: medium capacity type.
Impact resistance: 600W.
Resistance to impact resistance: 35.
The use of resistance to consume the motor regenerative energy, thereby reducing the time to slow down.
Alarm output terminal of braking resistor.
When the temperature relay of the braking resistor is activated, a circuit for cutting the main power supply of the frequency converter is formed. Optical cable(H-PCF cable).Box protection class: plastic, IP00.
Terminal size: M4.
Line diameter: 2 square mm, 3.5 square mm.
Weight: 0.7kg.
Used to reduce the noise from the power cord to the frequency converter or from the frequency converter to the power line.
Try to be close to the transducer for connection. Specification: three phase 200V.
Power: 0.75KW.
Maximum output voltage: three phase AC200 ~ 240V (input voltage correspondence).
Rated voltage: three phase 240V ~ 50/60Hz AC200.
Weight: about 3kg.
In the inverter is equipped with the servo can play the same static torque with PG vector control function,
DeviceNet communication makes the application field more extensive.
The high functionaal specifications are concentrated in the compact 3G3MX2-A4055-ZV1 Manual.
Equipped with PG vector control.
Subsequent models of 3G3RV.
CV/VT selection function.
Rich online automatic adjustment function (self learning function).
CX-Drive software. 3G3MX2-A4055-ZV1 Manual.
DeviceNet correspondence correspondence.
Multi function input and output function.
Colorful function.
Brake transistor built-in.
Protection function.