Frequency converter input power: 3 phase AC400V.
Weight: 2.1KG.
Standard applicable line diameter: 2 square mm or more.
Used to suppress harmonic currents generated by a transducer.
The effect of harmonic current suppression is better than that of AC reactor,
And it can be used with AC reactor. Specification: three phase 400V 3G3MX2-AB004-ZV1 Quick Reference Guide.
Power: 37KW.
Maximum output voltage: three phase AC380 ~ 480V (input voltage correspondence) 3G3MX2-AB004-ZV1
Rated voltage: three phase 480V ~ 50/60Hz AC380.
Weight: about 36kg.
In the inverter is equipped with the servo can play the same static torque with PG vector control function,
DeviceNet communication makes the application field more extensive.
The high functional specifications are concentrated in the compact 3G3MX2-AB004-ZV1 Quick Reference Guide.
Equipped with PG vector control.
Subsequent models of 3G3RV.
CV/VT selection function.
Rich online automatic adjustment function (self learning function).
CX-Drive software.
DeviceNet correspondence correspondence.
Multi function input and output function.
Colorful function.
Brake transistor built-in.
Protection function. When the power supply capacity exceeds the power supply capacity of the inverter or the need to improve the power factor, it is required to connect the AC reactor 3G3MX2-AB004-ZV1 Quick Reference Guide.
Please according to the maximum capacity of heavy load and light load rated conditions suitable for motor to select option. Specifications: Standard type.
Impact resistance: 200W.
Resistance to impact resistance: 180.
The use of resistance to consume the motor regenerative energy, thereby reducing the time to slow down.
Alarm output terminal of braking resistor.
When the temperature relay of the braking resistor iss activated, a circuit for cutting the main power supply of the frequency converter is formed 3G3MX2-AB004-ZV1 Manual. Power supply: 3 phase 3 line rated voltage 500V AC.
Rated current: 12A.
Weight: 0.9KG.
Used to reduce the noise generated by the inverter 3G3MX2-AB004-ZV1 Manual.
Try to be close to the transducer for connection. Cable length: 3m.
A digital operator is installed in a place far away from the transducer.