Name: MIL Connectors.
Specifications: Inputs/Outputs;
16 inputs/16 outputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1E-N14DT-D OPERATION MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-N14DT-D
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Output method: Analog resolution: 1/6000.
Analog Inputs: 4.I/O bits: 5, 120 (Expan-sion Racks: 7) CP1E-N14DT-D OPERATION MANUAL.
Program capacity: 30K steps.
Data memory capacity: 64K words (DM: 32K words, EM: 32K words ×1 banks).C500-ID I/O Unit TTL Input Unit 32 pts C500-ID501CN(3G2A5-ID501CN).
DC5V 3.5mA.Name: MIL Connectors.
Specifications: Outputs; 32 outputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CP1E-N14DT-D OPERATION MANUAL.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. C200H CPU 100/200-240VAC C200H-CPU02-E.CV500-BC Backplane CPU Exclusively for the Personal Computer Unit CV500-BC105.
Required for Hard Disk Drive Unit.Unit type: CS1 Special I/O Units.
name: Position control unit.
Specifications: Control method/Control,
output interface,Open-loop control by,
pulse train output/Line-driver output;
Number of control axes, 1 axis.
No. of unit numbers allocated: 1.
Current consumption:: 5V, 0 CP1E-N14DT-D Software Manual. 25A; 26V, --.
Standards: U, C, N, L, CE.
High-speed, High-precision,
positioning with 1, 2, or 4 axes.
Versatile functions and superb,
performance enable the construction,
of compact, high-performance machhines CP1E-N14DT-D Software Manual.
With its ultra-compact size of 31×90mm,
(W×H),this highly space-efficient Position,
Control Unit(PCU) enables up to 4 axes,
of motor control.