Model: CPM2C-24EDT1M. Units with 24 I/O points
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops CP1E-N20DR-A OPERATION MANUAL. I/O Control UnitModel: C200H-B7A22 CP1E-N20DR-A
I/O points: 32 output points and 32 input points or 30 input points + 2 error
inputs.
Weight: 300g max.Name: e-CON Connectors.
Specifications: Inputs/Outputs;
16 inputs /16 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CP1E-N20DR-A OPERATION MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1E-N20DR-A OPERATION MANUAL. CV500-ET CPU Bus Unit for Com Ethernet Unit CV Series Only CV500-ETN01.
10BASE-5 type.Model : CV1000-DM641.
Available CV1000/2000/CVM1-CPU21-V2.
64K words.C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD007(3G2A5-AD007).
Input: 4 pts.
Specification: 0~+10V.Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 4.
No. of unit numbers allocatted: 1 CP1E-N20DR-A Software Manual.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk with one Position,
Control Unit that supports MECHATROLINK-II CP1E-N20DR-A Software Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.