Programmed using the Fuzzy Support Software. Up to 8 inputs and 4 outputs.Unit type: CJ1 Basic I/O Units.
name: B7A Interface Units.
Specifications: I/O points, 32 inputs/outputs;
External connection, Removable terminal block.
No. of words allocated: 4 words.
Current consumption: 5V, 0.07A; 24V, -- CP1E-N20DR-A OPERATION MANUAL.
Standards: UC1, CE.
It transmits 16 points of I/O signals per,
word with a pair of cables CP1E-N20DR-A
Easy and minimized wiring effort,
The B7A Interface Unit and B7A Link Terminal,
can be used in the same way as a standard,
Basic I/O Unit and I/O Terminal without,
any need to worry about communications.
This characteristic reduces the wiring,
when using more than one relatively remote,
sensor or actuator CP1E-N20DR-A OPERATION MANUAL.
C500-OD I/O Unit Transistor Output 16 pts C500-OD219.
DC12-24V 2.1A.CV500-VP CPU Bus Unit Personal Computer Unit Main Mem CV500-VP217.
8-MB memory; w/o floating-point processor.Required for Analog Input and Output Units: For one Analog Unit.Model: C200HW-COM03-V1.
Specifications: One RS-422/485 port.C1000H-CP CPU 62 k words 1024 pts C1000H-CPU01-E.Name: DC Power Supply Unit CP1E-N20DR-A OPERATION MANUAL.
Power supply voltage: 24 VDC.
Output capacity: 5 VDC output capacity, 4.3A;
26 VDC output capacity, 0.56A;
Total, 28W.
Options: 24 V DC service power supply, No;
RUN output, No.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.
CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 200 VAC CV500-FHD02.Unit type: CJ1 Basic I/O Units.
Product name: Interrupt Input Unit.
Specifications: I/O points, 16 inputs;
Input voltage current, 24 VDC, 7mA;
Commons: 16 points, 1 common;
Input pulse widt conditions, ON time:
0.05 ms max. OFF time: 0.5 ms max;
Max. Units mountable per Unit, 2;
External connection, Removable terminal block.
No. of words allocated: 1 word.
Current consumpttion: 5V, 0 CP1E-N20DR-A Manual. 08A; 24V, --.
Standards: UC1, N, L, CE.
High-speed Starting of I/O InterruptTasks.
Use Up to Two Units for a Total of Up,
to 32 Interrupt Inputs.
Receive inputs to start I/O interrupt tasks.
When the Interruptt Input Unit receives an input,
the CPU Unit will interrupt execution of the,
cyclic tasks in the normal CP1E-N20DR-A Manual.
program and execute an I/O interrupt task.